This transparent film contains ultraviolet-absorbing compounds called mycosporines attached to the naturally derived polymer chitosan. Credit: Susana Fernandes

This transparent film contains ultraviolet-absorbing compounds called mycosporines attached to the naturally derived polymer chitosan. Credit: Susana Fernandes

Melissae Fellet reports in Chemical & Engineering News that new materials containing ultraviolet-absorbing molecules found in algae and reef-fish mucus could serve as nontoxic, biocompatible sunscreens. The photostable materials could be used in cosmetics or as UV-protective coatings for outdoor furniture or clothing, the researchers say. The research was published in ACS Appl. Mater. Interfaces 2015, DOI: 10.1021/acsami.5b04064.

Commercial sunscreens contain two types of compounds to block both longwave UV-A light that may cause cancer and shortwave UV-B light that causes sunburn. Some fish, algae, and cyanobacteria produce amino acids called mycosporines that absorb both UV-A and UV-B light. To develop more effective, biocompatible sunscreens, some manufacturers have added mycosporines to their formulations.

But free mycosporine molecules can diffuse through a smear of sunscreen, making it difficult for the UV-blocking agents to stay where they are applied.

Susana C. M. Fernandes and Vincent Bulone, of the Royal Institute of Technology, in Sweden, and their colleagues, thought they might solve this problem by attaching the mycosporine molecules to a polymer. First, they activated the carboxylic acid portion of each of three mycosporines using the coupling agent N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride. Then the researchers attached each activated mycosporine to long chains of chitosan polymer. Chitosan is produced from chitin, a sugar polymer in crab, shrimp, and insect shells.

The new materials absorbed UV-A and UV-B light as effectively as the free mycosporines. The molar absorptivities of the three materials were 125 to 192% greater than that for ethylhexyl p-methoxycinnamate, a UV-B-absorbing ingredient in many current commercial sunscreens. Larger absorptivity values indicate greater UV protection, so these new materials could potentially be superior to current sunscreen ingredients, Bulone says.

Researchers created stable sunscreen materials by attaching chitosan (red) to the mycosporines porphyra-334 (CS-P334), shinorine (CS-SH), and mycosporine-glycine (CS-MGly). Chitosan is derived from crustacean shells, and mycosporines are found in fish mucus and algae. Credit: ACS Appl. Mater. Interfaces

Researchers created stable sunscreen materials by attaching chitosan (red) to the mycosporines porphyra-334 (CS-P334), shinorine (CS-SH), and mycosporine-glycine (CS-MGly). Chitosan is derived from crustacean shells, and mycosporines are found in fish mucus and algae. Credit: ACS Appl. Mater. Interfaces

The researchers then cast films from the new materials and found that the films were stable after exposure to 12 hours of UV light or temperatures of 80°C. These properties may make the materials useful as UV-protective coatings for outdoor furniture or clothing, Bulone says.

Vijay Kumar Thakur of Washington State University, who was not involved with the work, says that because mycosporines are naturally occurring amino acids, they could be more biocompatible than current sunscreen ingredients. Bulone and colleagues found that growing mouse fibroblasts on the films for three weeks resulted in little cell death. Thakur adds that chitosan has inherent antimicrobial properties, so he wonders if these new materials may be antimicrobial, as well.

Bulone thinks commercializing these new materials could be relatively simple, since all the components – the mycosporines, chitosan, and the coupling reagent – are currently used in cosmetics, pharmaceuticals, or medical products.